FixVault
Home › Dodge and Ram › 2005 › Sprinter 2500, Cab Chassis › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System › Fuel Injection › O2 Sensor › Installation

O2 Sensor: Installation

  1. Install the oxygen sensor. See Figure.
  2. Install the heatshield and tighten fasteners to 9N.m (80 lbs. in.). See Figure.
  3. Properly position the oxygen sensor wiring harness and connect the electrical connector. See Figure.
  4. Connect the negative battery cable.
About FixVault