FixVault
Home › Dodge and Ram › 2005 › Sprinter 2500, Cab Chassis › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System › Fuel Injection › O2 Sensor › Removal

O2 Sensor: Removal

  1. Disconnect the negative battery cable.
  2. Remove the exhaust heat shield. See Fig 1.
  3. Disconnect the O2 sensor harness connector. See Fig 1.
  4. Remove the O2 sensor. See Fig 2.
Fig 1: HEAT SHIELD
GC0037177Courtesy of DAIMLERCHRYSLER CORP.
1 - FASTENERS
2 - SHIELD
3 - O2 SENSOR HARNESS CONNECTOR
Fig 2: OXYGEN SENSOR
GC0037176Courtesy of DAIMLERCHRYSLER CORP.
1 - OXYGEN SENSOR
About FixVault