FixVault
Home › Dodge and Ram › 2006 › Viper 2D Convertible › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules › Powertrain Control Module › Installation

Powertrain Control Module: Installation

If the PCM is replaced of usage, update the mileage and vehicle identification number (VIN) in the new PCM. Use the DRBIII® scan tool to change the mileage and VIN in the PCM. If this step is not done a Diagnostic Trouble Code (DTC) may be set. Refer to POWERTRAIN DIAGNOSTIC PROCEDURES and the DRBIII® scan tool.

  1. Install PCM and tighten bolts.
  2. Install the three connector to PCM.
  3. Install the cleaner assembly, refer to MECHANICAL - 8.3L - VIPER for more information.
  4. Connect negative battery cable and reprogram radio and clock.
  5. Using DRBIII® scan tool, program mileage and vehicle identification number (VIN) into PCM. Refer toPOWERTRAIN DIAGNOSTIC PROCEDURES the DRBIII® scan tool and .
About FixVault