FixVault
Home › Dodge and Ram › 2007 › Caliber R/T, AWD › Repair and Diagnosis › Body & Frame › Windows › Power Window System (Service Information) › Window Motor › Removal

Window Motor: Removal

  1. Move the window to the full UP position, if possible.
  2. Disconnect and isolate the battery negative cable.
  3. Remove the front door module. Refer to DOOR MODULE .
  4. Disconnect electrical harness connector from motor.
  5. Remove window regulator.
  6. With regulator on bench, remove four screws retaining the motor to the regulator and remove motor.
About FixVault