FixVault
Home › Dodge and Ram › 2007 › Caliber R/T, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Engine & Automatic Transmission Cooling System › Engine › Heater-Engine Block › Installation

Heater-Engine Block: Installation

  1. Thoroughly clean bore hole.
  2. Insert block heater assembly into bore.
  3. Install retaining clip.
  4. Connect power cord to block heater.
    Fig 1: AIR CLEANER INLET
    GC0053117Courtesy of CHRYSLER LLC
  5. Install air intake inlet.
  6. Install engine cover.
About FixVault