FixVault
Home › Dodge and Ram › 2007 › Durango 3.7 K › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Electronic Control Modules › Module - Front Control › Removal › Module-Front Control

Module-Front Control

Fig 1: Integrated Power Module
GC0009819Courtesy of CHRYSLER LLC
  1. Disconnect the positive and negative battery cables from the battery.
  2. Partially remove the Integrated Power Module (IPM) from the engine compartment.
  3. Remove the front control module retaining screws.
  4. Pull the front control module straight from the IPM.
About FixVault