Module-Steering Column Control: Disassembly

Fig 1: Left Stalk Switch

Courtesy of CHRYSLER LLC

1. Remove the left multi-function switch stalk retaining screw (2).
2. Pull the left stalk out of the SCCM.
   Fig 2: Left Stalk Switch Electrical Connector

   Courtesy of CHRYSLER LLC
3. Disconnect the left stalk electrical connector.
4. Separate the left switch from the SCCM.
   Fig 3: Right Multi-Function Switch

   Courtesy of CHRYSLER LLC
5. Remove the one right multi-function switch retaining screw.
6. Pull right switch out of SCCM.
   Fig 4: Identifying Jumper Wire Harness Connector, Right Multi-Function Switch & Clockspring

   Courtesy of CHRYSLER LLC
7. Disconnect the right switch electrical connector.