PLUG, Glow: Installation: Installation

Fig 1: Removing/Installing Glow Plugs

Courtesy of CHRYSLER LLC

1. Clean glow plug bay and install glow plug.
2. Tighten glow plugs to 10 N.m (89 lbs. in.).
3. Connect glow plug electrical connector.
4. Install cylinder head cover.
   • For 1.8L engine, refer to INSTALLATION .
   • For 2.0L engine (Gas), refer to INSTALLATION .
   • For 2.4L engine, refer to INSTALLATION .
5. Install engine cover.
   • For 1.8L engine, refer to INSTALLATION .
   • For 2.0L engine (Gas), refer to INSTALLATION .
   • For 2.4L engine, refer to INSTALLATION .
6. Connect negative battery cable.