FixVault
Home › Dodge and Ram › 2009 › Sprinter 2500, Van Cargo › Repair and Diagnosis › Engine Performance › System › DTCS 2230 To 2809 › Event 2809-Fault Present In Transmission Control Module › Diagnostic Test

Diagnostic Test

  1. DTC PRESENT IN TRANSMISSION CONTROL MODULE 
    1. This is an informational DTC letting you know that a DTC(s) is stored in the Transmission Control Module or a CAN Bus Failure occurred.
    2. Using a scan tool, read the Transmission Control Module DTCs and perform the appropriate Diagnostic Procedure.

      ECM Diagnostic Information complete.

      Continue 

      • Test Complete.
About FixVault