9541-Occupant Restraint Controller Pin 39/40 Not Configured: Notes
For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .
- When Monitored:
With the ignition on.
- Set Condition:
This DTC will set if the module detects a loose or damaged contact, contamination or corrosion or incorrect coding.
| Possible Causes |
|---|
| CONNECTOR NOT PROPERLY SEATED |
| CONNECTOR DAMAGE |
| TERMINAL DAMAGE |
| CODING |
| OCCUPANT RESTRAINT CONTROLLER (ORC) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See DTC-Based Diagnostics/CONTROLLER, Occupant Restraint (ORC) - Standard Procedure .