Diagnostic Test
- REPLACE THE ORC NOTE: Ensure that the battery is fully charged.
- Turn the ignition on.
- With the scan tool, read ORC DTC.
Does the scan tool display active: 9085-LEFT SIDE IMPACT SENSOR 1 CONFIGURATION ERROR?
Repair
- Replace the ORC in accordance with the Service Information.
- Perform *RESTRAINTS SYSTEM VERIFICATION TEST. See DTC-Based Diagnostics/CONTROLLER, Occupant Restraint (ORC) - Standard Procedure
WARNING: If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to follow these instructions may result in possible serious or fatal injury.WARNING: Turn the ignition off disconnect the 12-volt battery and wait two minutes before proceeding. Failure to follow these instructions may result in possible serious or fatal injury.