Charging System (Service Information): Generator: Removal: 2.8L

Fig 1: Alternator/Generator Electrical Connection

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate negative battery cable at battery.
2. Remove generator drive belt. Refer to BELT, SERPENTINE, REMOVAL .
3. Unsnap plastic protective cover (1) from B+ mounting stud.
4. Remove B+ terminal mounting nut (3) and B+ terminal (2) at top of generator.
5. Disconnect field wire electrical connector (4) by pushing on connector tab.
   Fig 2: Generator 2.8L

   Courtesy of CHRYSLER GROUP, LLC
6. Remove generator mounting bolts (1) and (3).
7. Remove generator (2) from vehicle.