2.2L Diesel

Fig 1: Identifying Air Inlet Tube

Courtesy of CHRYSLER GROUP, LLC

Remove the air inlet tube.

Fig 2: Belly Pan
Courtesy of CHRYSLER GROUP, LLC
Disconnect and isolate the negative battery cable.
If equipped, remove the belly pan.

Fig 3: Identifying Main Drive Belt
Courtesy of CHRYSLER GROUP, LLC
Partially drain the radiator. Refer to STANDARD PROCEDURE .
Remove the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL .

Fig 4: Bottom Generator Mounting Retainer
Courtesy of CHRYSLER GROUP, LLC
Remove the bottom generator mounting retainer (2).

Fig 5: Identifying Radiator Support Shroud
Courtesy of CHRYSLER GROUP, LLC
Remove the radiator support shroud.

Fig 6: Identifying Hood Release Cable
Courtesy of CHRYSLER GROUP, LLC
Disconnect the hood release cable.

Fig 7: Identifying Power Steering Reservoir
Courtesy of CHRYSLER GROUP, LLC
Remove the retainer and position aside the power steering reservoir.

Fig 8: Upper Core Support Seal Push Pins & Radiator Core Support Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the radiator core support.

Fig 9: Identifying Upper Radiator Hose
Courtesy of CHRYSLER GROUP, LLC
Position aside the A/C compressor.
Disconnect the upper radiator hose from the radiator.

Fig 10: Identifying Electrical Connector
Courtesy of CHRYSLER GROUP, LLC
Disconnect the electrical connector and the B+ from the generator.

Fig 11: Identifying Upper Generator Mounting Bolt & Generator
Courtesy of CHRYSLER GROUP, LLC
Remove the upper generator mounting bolt.
Remove the generator.