Pcm - Removal

WARNING: This page is about a different car, the 2012 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Retainers, Fresh Air Inlet Duct & Air Cleaner Body

Courtesy of CHRYSLER GROUP, LLC

Remove the air intake duct.
Disconnect negative battery cable.

Fig 2: Electrical Connectors, PCM, Three Mounting Bolts & Ground Wire
Courtesy of CHRYSLER GROUP, LLC
Disconnect the Powertrain Control Module (PCM) harness connectors (2) by pressing in the locking tab and lift the lever.
Remove bolts (3) and the PCM (4) from the air cleaner housing.