Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Nut, Output Shaft Flange (2WD Models equipped with flange) | 149 | 110 | - |
| Fitting, cooler line at trans | 17.5 | - | 155 |
| Bolt, torque converter housing to engine upper four | 41 | 30 | - |
| Bolt, torque converter housing to engine lower four | 54 | 40 | - |
| Bolts, transmission collar | 68 | 50 | - |
| Bolt, torque converter to driveplate | 31 | 23 | - |
| For rear mount specifications | 3.6L. Refer to TORQUE SPECIFICATIONS . 5.7L. Refer to TORQUE SPECIFICATIONS . | ||
| Bolt, driveplate to crankshaft | 75 | 55 | - |
| Bolt, converter housing | 68 | 50 | - |
| Bolt, oil pan | 12 | - | 105 |
| Screw, primary fluid filter | 4.5 | - | 40 |
| Nuts, transfer case | 35 | 26 | - |
| Oil Filter, Cooler Return | 9.5 | - | 84 |
| Bolt, oil pump | 28 | 21 | - |
| Bolt, oil pump body to cover | 4.5 | - | 40 |
| Screw, plate to oil pump body | 4.5 | - | 40 |
| Bolt, valve body to case | 12 | - | 105 |
| Plug, pressure test port | 5 | - | 45 |
| Bolt, reaction shaft support | 12 | - | 105 |
| Screw, valve body to transfer plate | 5.5 | - | 50 |
| Screw, solenoid module to transfer plate | 6 | - | 50 |
| Screw, accumulator cover | 7 | - | 60 |
| Screw, detent spring | 4.5 | - | 40 |
| Bolt, input speed sensor | 12 | - | 105 |
| Bolt, output speed sensor | 12 | - | 105 |
| Bolt, line pressure sensor | 12 | - | 105 |
| Bolt, extension housing | 54 | 40 | - |
| Screw, manual valve cam retaining | 4.5 | - | 40 |
| Screw, manual selector shaft retaining | 28 | - | 250 |
| Cross-bolt, manual selector shaft | 16 | - | 140 |