FixVault
Home › Dodge and Ram › 2014 › Durango SXT, RWD › Repair and Diagnosis › External Pages › Different car › Section 123 (Electronic Control Modules (Service Information)) › Module, Body Control › Installation › Installation

Module, Body Control: Installation: Installation

WARNING: This page is about a different car, the 2016 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module & Fasteners
GC0158355Courtesy of CHRYSLER GROUP, LLC
  1. Install the BCM to the mounting bracket.
  2. Install all the fasteners (2) to secure the BCM to the bracket.
  3. Connect all harness connectors to the BCM assembly.
    Fig 2: Scuff Plate & Screws
    GC0145626Courtesy of CHRYSLER GROUP, LLC
  4. Install the passenger side lower cowl panel (1).
  5. Install the passenger side lower dash closeout panel.
  6. Connect the negative battery cable to the proper battery post.
  7. Using the scan tool, perform the Body Verification Test. Refer to STANDARD PROCEDURE .
About FixVault