Radiator, Engine Cooling: Removal: Gas

Disconnect negative cable from battery.
Drain the cooling system. Refer to STANDARD PROCEDURE .

Fig 1: Coolant Recovery Bottle
Courtesy of CHRYSLER GROUP, LLC
Remove coolant recovery container (3) (Refer to BOTTLE, PRESSURIZED COOLANT, REMOVAL ).

Fig 2: Front Bumper Center Grill & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove the front bumper center grill (2).

Fig 3: Center Grill Support Frame
Courtesy of CHRYSLER GROUP, LLC
Remove the center grill support frame (1).
If equipped, remove the power steering cooler.

Fig 4: Upper Close Out Panel
Courtesy of CHRYSLER GROUP, LLC
Remove the upper radiator cross member support (2). Refer to CROSSMEMBER, RADIATOR, INSTALLATION .

Fig 5: Air Shutter & Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove the air shutter (1).

Fig 6: Removing Radiator Cooling Fan
Courtesy of CHRYSLER GROUP, LLC
Remove the radiator cooling fan. Refer to FAN, COOLING, REMOVAL .
Remove upper and lower radiator hoses from the radiator.
Separate the condenser from the radiator.

Fig 7: Removing/Installing Radiator Mounts
Courtesy of CHRYSLER GROUP, LLC
Remove the radiator mounts (1).
Lift radiator out of vehicle.