FixVault
Home › Dodge and Ram › 2015 › C/V Tradesman › Repair and Diagnosis › Transmission › Automatic Trans › Engine Cooling System › Engine › Fan, Cooling › Removal › Diesel

Fan, Cooling: Removal: Diesel

  1. Disconnect and isolate negative battery cable.
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
    Fig 1: Overflow Hose & Fan Shroud
    GC0170981Courtesy of CHRYSLER GROUP, LLC
  3. Detach the overflow hose (1) from cooling fan shroud (2).
    Fig 2: Cooling Fan, Module & Upper Radiator Hose
    GC0147254Courtesy of CHRYSLER GROUP, LLC
  4. Remove the upper radiator hose (3).
    Fig 3: Cooling Fan Wiring Harness Connector
    GC0170971Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the cooling fan wiring harness connector (1).
    Fig 4: Electric Fan Connector & Clips
    GC0145992Courtesy of CHRYSLER GROUP, LLC
  6. Remove the radiator fan (3) by pressing the retaining clips (2) in and lifting upwards to release from mounts.
About FixVault