Cables, Battery: Installation: Installation: Notes

Fig 1: Routing Clips - Rear Seat Area

Courtesy of CHRYSLER GROUP, LLC

1. One at a time, secure the battery positive cable to the routing clips located in the rear seat area.
   Fig 2: Positive Cable Routing Clips

   Courtesy of CHRYSLER GROUP, LLC
2. One at a time, secure the battery positive cable to the routing clips located in the rear compartment area.
3. Position the carpet back to the normal position.
4. Install the right, B - pillar lower trim panel. Refer to PANEL, B-PILLAR TRIM, INSTALLATION .
5. Install the right, front and rear door sill trim panels.
6. Install the right, rear seat cushion. Engage retainer loops into cup on floor kick up. Push downward at forward edge at each retainer loop of the rear seat cushion to engage retainers.
7. Install the right, front seat. Refer to SEAT, FRONT, INSTALLATION .
   Fig 3: Power Distribution Center Cover & Positive Cable Fastener

   Courtesy of CHRYSLER GROUP, LLC
8. Install the battery positive cable to rear Power Distribution Center (PDC) fastener (3).
   Fig 4: Battery Negative Cable & Battery Positive Cable

   Courtesy of CHRYSLER GROUP, LLC
9. Install the PDC cover.
10. Connect the battery positive cable (2).
11. Connect the battery negative cable (1) to the IBS.
12. Install the spare tire cover.