Radiator, Engine Cooling: Installation: Installation

Fig 1: Radiator Mounting Bolts & A/C Condenser Mounting Bolts

Courtesy of CHRYSLER GROUP, LLC

1. Care should be taken not to damage radiator cooling fins during installation.  Install radiator into position. The lower rubber isolators must rest in the holes in the bottom of the radiator support.
2. Install the A/C condenser mounting bolts (2). Tighten A/C condenser mounting fasteners to 5 N.m (45 in. lbs.).
3. Install the radiator mounting bolts (1). Tighten bolts to 11 N.m (95 in. lbs.).
4. Install the cooling fan assembly (4). Tighten fasteners to 11 N.m (95 in. lbs.). Refer to FAN, COOLING, ELECTRIC, INSTALLATION .
   Fig 2: Lower Radiator Hose & Clamp

   Courtesy of CHRYSLER GROUP, LLC
5. Connect the lower radiator hose (1).
   Fig 3: Upper Radiator Hose, Clamp & Housing

   Courtesy of CHRYSLER GROUP, LLC
6. Connect the upper radiator hose (2).
   Fig 4: Oil Cooler & Fasteners

   Courtesy of CHRYSLER GROUP, LLC
7. Install the oil cooler mounting fasteners (1 and 3). Tighten the fasteners to 6 N.m (53 in. lbs.).
   Fig 5: Air Cleaner Housing, Cover Screws & Housing Retainers

   Courtesy of CHRYSLER GROUP, LLC
8. Install the air cleaner housing assembly (1), connect the throttle body air inlet hose. Refer to BODY, AIR CLEANER, INSTALLATION .
9. Fill the cooling system with coolant. Refer to STANDARD PROCEDURE .
10. Operate the engine until it reaches normal operating temperature. Check the cooling system for correct fluid level.