Heater, Engine Block: Installation: 5.7L/6.2L/6.4L

Fig 1: Heater, Exhaust And Bolt

Courtesy of CHRYSLER GROUP, LLC

1. Thoroughly clean the cylinder block core hole and the block heater seat.
2. Insert the block heater assembly (2) into the engine block.
3. Tighten the bolt (3) to the proper torque specification. Refer to SPECIFICATIONS .
4. Connect the power cord to the block heater.
5. Install the belly pan. Refer to BELLY PAN, INSTALLATION or BELLY PAN, ENGINE, INSTALLATION .