FixVault
Home › Dodge and Ram › 2016 › ProMaster City Base › Repair and Diagnosis › External Pages › Different car › Section 271 (Fuel System) › Fuel Injection, Diesel › Sensor, Boost Pressure › Installation › Installation

Sensor, Boost Pressure: Installation: Installation

WARNING: This page is about a different car, the 2015 RAM ProMaster 3500, 2015 RAM ProMaster 2500, and 2015 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Boost Pressure Sensor & Bolt
GC0162085Courtesy of CHRYSLER GROUP, LLC
  1. Inspect O-ring seal.
  2. Lubricate O-ring seal.
  3. Install the boost pressure sensor (1) and securely tighten the bolt (2).
    Fig 2: Boost Pressure Sensor Connector
    GC0161807Courtesy of CHRYSLER GROUP, LLC
  4. Connect the boost pressure sensor wire harness connector (1).
    Fig 3: Charge Air Cooler Hose & Clamp
    GC0161813Courtesy of CHRYSLER GROUP, LLC
  5. Install the Charge Air Cooler (CAC) hose from the EGR air flow control valve elbow and securely tighten clamp.
  6. Install the radiator crossmember. Refer to CROSSMEMBER, RADIATOR, INSTALLATION .
  7. Connect the negative battery cable.
About FixVault