Program The Pcm (Powertrain Control Module)
WARNING: This page is about a different car, the 2014 RAM ProMaster 3500, 2014 RAM ProMaster 2500, and 2014 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the scan tool.
- Check vehicle for DTCs.
- Clear all stored DTCs.
- Turn car OFF then ON and confirm DTCs are gone.
- Refer to PCM/ECM REPROGRAMMING - GAS and perform the PCM/ECM PROGRAMMING procedure.
If required, continue to programming the next module.