FixVault
Home › Dodge and Ram › 2016 › Viper Base › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Electronic Control Modules (Service Information) › Module, Keyless Ignition Node › Installation › Installation

Module, Keyless Ignition Node: Installation: Installation

  1. Connect the wire harness to the keyless ignition node.
  2. Install the keyless ignition node with the four (4) screws.
  3. Install the chin bezel. Refer to CONSOLE, CENTER, INSTALLATION .
  4. Install the kneeblocker/lower steering column opening trim.
  5. Install the instrument panel end cap.
  6. Connect the negative battery cable.
About FixVault