Battery (Service Information): Battery: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the battery (2) into the battery tray.
2. Connect the vent tube to the battery.
3. Install the battery hold down clamps (3). Tighten the bolts (1) to 4 N.m (35 in. lbs.).

   Courtesy of CHRYSLER GROUP, LLC

4. Connect the battery positive cable. Tighten clamp to 7 N.m (62 in. lbs.).

   Courtesy of CHRYSLER GROUP, LLC

5. Connect the battery sensor (3) to the negative battery post. Tighten clamp to 7 N.m (62 in. lbs.).