Radiator, Engine Cooling: Removal: 5.7L/6.4L

Disconnect and isolate the negative battery cable.
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .

Courtesy of CHRYSLER GROUP, LLC
Remove bolts (1) and the belly pan.
Drain the cooling system. Refer to STANDARD PROCEDURE .
Remove the air cleaner body. Refer to 5.7L - BODY, AIR CLEANER, REMOVAL or 6.4L - BODY, AIR CLEANER, REMOVAL .
Remove the upper radiator hose.

Courtesy of CHRYSLER GROUP, LLC
Remove the lower radiator hose (1).
Remove the radiator fan assembly. Refer to FAN, COOLING, REMOVAL .
Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL .
Remove support and lower the vehicle.

Courtesy of CHRYSLER GROUP, LLC

CAUTION:
Bolts are installed with threadlocker. Use hand tools to remove the upper radiator mounting bolts.
Remove bolts (3) and the upper radiator isolator (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the lower condenser mounting bolts.
Remove the bolt (2) located between the cooler lines.
Using a suitable hanger. Support the condenser and remove the right side upper mounting bolt.

Courtesy of CHRYSLER GROUP, LLC
Carefully remove the upper shroud cover (2) by using a pick (3) to pull the cover retaining hole away from the clip (1) along the edge.
Tilt radiator toward engine and remove the radiator from vehicle.