Center, Power Distribution (PDC): Installation

Courtesy of CHRYSLER GROUP, LLC

1. Install the Power Distribution Center (PDC) to the hinge pins. Pull out on the PDC housing at the fit area if needed to pop the PDC into place.

   Courtesy of CHRYSLER GROUP, LLC

2. Connect all the electrical connectors from the harness to the back of the PDC. Please verify no loose connectors and uninstalled connectors before snapping the PDC to the closed position within the housing.

   Courtesy of CHRYSLER GROUP, LLC

3. Connect the electrical connection for the positive cable and tighten the nut (1).

   Courtesy of CHRYSLER GROUP, LLC

4. Place the cover in position and tighten the screws securely.
5. Connect the negative battery terminal.