FixVault
Home › Dodge and Ram › 2018 › ProMaster 1500 › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel Injection, Diesel › Sensor, Air Temperature, Inlet › Installation › Inlet Temperature Sensor

Inlet Temperature Sensor

GC0161960Courtesy of CHRYSLER GROUP, LLC
  1. Install the inlet air temperature sensor (2) and securely tighten.
  2. Connect inlet air temperature sensor wire harness connector (3).
  3. Install the EGR cooler. Refer to COOLER, EXHAUST GAS RECIRCULATION (EGR), INSTALLATION .
  4. Connect the negative battery cable.
About FixVault