Fan, Cooling: Removal: 3.6L

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate negative battery cable.
Drain the cooling system. Refer to STANDARD PROCEDURE .
Remove the coolant return hose (1).
Remove the bolts (6) and position aside the pressurized coolant bottle (3)

Courtesy of CHRYSLER GROUP, LLC
Remove the front bumper fascia (1). Refer to FASCIA, FRONT, REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Remove the upper close out panel (2) and position aside.

Courtesy of CHRYSLER GROUP, LLC
Remove upper radiator hose (3) and position aside.

Courtesy of CHRYSLER GROUP, LLC
Disconnect the cooling fan relays wire harness connector from the (1), the resistors (2) and the cooling fan motors (3).

Courtesy of CHRYSLER GROUP, LLC
Separate the wire harness (1) from the cooling fan shroud.

Courtesy of CHRYSLER GROUP, LLC
Remove the radiator fan (3) by pressing the retaining clips (2) in and lifting upwards to release from the mounts.