Sensor, Transmission Range: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Install a new  manual lever oil seal (2) using socket (3).

   Courtesy of CHRYSLER GROUP, LLC

2. Install the manual lever in the case up to the point of the TRS.

   Courtesy of CHRYSLER GROUP, LLC

3. Install the TRS/rooser comb onto the manual lever and fully install the manual lever into the case.

   Courtesy of CHRYSLER GROUP, LLC

4. Install the roll pin (3) to the TRS/rooster comb (1) using a pin punch (2).

   Courtesy of CHRYSLER GROUP, LLC

5. Install the set screw (1) at manual lever (2) and tighten to 1 N.m (10 in. lbs.).

   Courtesy of CHRYSLER GROUP, LLC

6. Install the park rod assembly (2) to the TRS/rooster comb (1) and place the park rod assembly into the guide assembly.
7. Place the park pawl pin into the park pawl tube.
8. Install the electrical connector.
9. Install the valve body. Refer to VALVE BODY, INSTALLATION .