Heater, Engine Block: Installation: 3.6L

Courtesy of CHRYSLER GROUP, LLC

1. Clean block core hole and heater seat.
2. Insert heater block (1) assembly.
3. With block heater seated, tighten screw (2) to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
4. Install power cord plug to block heater (1).
5. Fill cooling system with coolant to the proper level. Refer to STANDARD PROCEDURE .

   Courtesy of CHRYSLER GROUP, LLC

6. Install the A/C compressor. Refer to COMPRESSOR, A/C, INSTALLATION .