FixVault
Home › Dodge and Ram › 2019 › ProMaster City Base › Repair and Diagnosis › Body & Frame › Windows › Power Windows (Service Information) › Switch, Power Window › Removal And Installation › Installation

Removal And Installation: Installation

  1. Attach the door handle rod to the switch bezel.
  2. Attach the handle rod tether to the rod. Slide the pin through the hole.
  3. Connect the wiring harness connector to the bezel.
  4. Snap the bezel into place in the door panel.
  5. Install both screws securing the bezel to the door panel.
  6. Snap both bolt covers in place.
  7. Connect the negative battery cable.
About FixVault