General Specifications
CLUTCH SPECIFICATIONS
| DESCRIPTION | MILLIMETERS | INCHES |
|---|---|---|
| Low/Reverse Clutch Pack Clearance | 0.89 -1.47 | 0.035 -0.058 |
| Reverse Clutch | 0.76 - 1.245 | 0.030 - 0.049 |
| Overdrive Clutch | 0.491 - 2.345 | 0.019 -.092 |
| Underdrive Clutch | 0.91 - 1.47 | 0.036 - 0.058 |
| 2/4 Clutch Clearance | 0.76 - 2.64 | 0.030 - 0.104 |
| Input Shaft End Play | 0.13 - 0.635 | 0.005 to 0.025 |
| Low Clutch Clearance | 0.48 - 0.76 | 0.019 -0.030 |
| Direct Clutch Pack Clearance | 0.95 - 1.41 | 0.037 - 0.056 |
GEAR TRAIN MEASUREMENTS
| DESCRIPTION | MILLIMETERS | INCHES |
|---|---|---|
| Front Sun Gear Bushings | 29.55 - 29.60 | 1.163 -1.165 |
| Rear Carrier Bushing | 29.75 - 30.00 | 1.171 - 1.181 |
| Overdrive Hub / Shaft Bushing | 21.52 - 21.58 | 0.847 - 0.850 |
| Oil Pump Reaction Support Sleeve | 45.27 - 45.31 | 1.782 - 1.784 |
| Oil Pump Outer Gear to Pump Pocket | 0.089-0.202 | 0.0035-0.0079 |
| Oil Pump Outer Gear to Crescent | 0.060-0.298 | 0.0023 - 0.0117 |
| Oil Pump Inner Gear to Crescent | 0.093 - 0.385 | 0.0036 - 0.0151 |
| Oil Pump Between Both Gear end Faces and the Reaction Shaft Support | 0.020-0.046 | 0.0008-0.0018 |
| Front / Rear Carrier Pinion end Play | 0.15 - 0.61 | 0.006 - 0.024 |
| Torque Converter Hub Bushing | 38.019 - 38.11 | 1.499 - 1.501 |
| Output Carrier Pinion End Play | 0.15 - 0.76 | 0.006 - 0.030 |
| Direct Clutch Retainer Bushing | 39.71 - 39.75 | 1.563 - 1.565 |
| Low Clutch Retainer Bushing (Steel) | 28.22 - 28.26 | 1.111 - 1.113 |
| Low Clutch Retainer Bushing (Brass) | 30.01 - 30.03 | 1.181 - 1.182 |
TURNING TORQUE
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Output Shaft Gear Drag Torque | 0.4 - 1.0 | - | 3 - 8 |
| Final Drive Remote Pinion Drag Torque | 0.2 - 1.0 | - | 2 - 8 |
| Differential Turning Torque | 1.0 - 2.5 | - | 10 - 22 |