Module, Active Damping Control (ADCM): Removal
WARNING: This page is about a different car, the 2021 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the left side inner trunk fasteners and position the carpet aside.
- Disconnect the wire harness connectors and remove the bolts (2) securing the Adaptive Damping Control Module (ADCM).
- Release the integral latches securing the ADCM (1) to the mounting bracket and slide the module upward to remove from the vehicle.