FixVault
Home › Dodge and Ram › 2021 › ProMaster 2500 › Repair and Diagnosis › Electrical › Charging Systems › Charging (Service Information) › Generator › Removal

Charging (Service Information): Generator: Removal

  1. Disconnect the negative battery cable.
  2. Remove the radiator cooling fans. Refer to FAN, COOLING, REMOVAL .
  3. Raise the vehicle.
  4. Remove the lower belly pan.
  5. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL .
    GC0160307Courtesy of CHRYSLER GROUP, LLC
  6. Remove the serpentine belt (1). Refer to BELT, SERPENTINE, REMOVAL .
  7. Remove the idler pulley (7) at the generator (5).
    NOTE:

    Evacuation of the A/C system is not necessary when repositioning the A/C compressor.

    GC0145963Courtesy of CHRYSLER GROUP, LLC
  8. Disconnect the electrical connectors (2) at the A/C compressor (1).
  9. Remove the bolts (3) and the nuts (4) at the A/C compressor.
  10. Position the A/C compressor aside.
    GC0147027Courtesy of CHRYSLER GROUP, LLC
  11. Disconnect the generator field electrical connector (1).
  12. Remove the B+ nut (2) and remove the B+ cable (3).
  13. Remove the upper generator bolts (1).
    GC0159375Courtesy of CHRYSLER GROUP, LLC
  14. Remove the lower generator bolt (3).
  15. Remove the generator (2) from the vehicle.
About FixVault