Insulator, Engine Mount, Right: Installation

Courtesy of CHRYSLER GROUP, LLC

1. If removed, install the right engine mount bracket (1) and tighten bolts (2 and 3) to:
   • Tighten M10 bolts (2) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
   • Tighten M8 bolt (3) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .

   Courtesy of CHRYSLER GROUP, LLC

2. Install the right engine mount (2). Tighten nuts (1) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .

   Courtesy of CHRYSLER GROUP, LLC

3. Hand start the engine mount to engine bracket bolts (1). Tighten bolts (1) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
4. Remove the floor jack.
5. If removed, install the belly pan.

   Courtesy of CHRYSLER GROUP, LLC

6. Install the air intake resonator. Refer to RESONATOR, AIR CLEANER, INSTALLATION .
7. Connect the negative battery cable and tighten nut.