Removal And Installation: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
2. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
3. Unlock and disconnect the electrical connector (2) from the Inlet Air Temperature (IAT) sensor (1).

   Courtesy of CHRYSLER GROUP, LLC

4. Rotate the Intake Air Temperature (IAT) sensor (1) 1/4 turn counter clockwise and remove the sensor from the clean air hose.

   Courtesy of CHRYSLER GROUP, LLC

5. The IAT sensor O-ring seal (1) can be reused if not damaged.