FixVault
Home › Dodge and Ram › 2021 › ProMaster City Base › Repair and Diagnosis › External Pages › Different car › Section 2 (Electronic Control Modules (Service Information)) › Module, Electronic Shift (ESM) › Installation

Module, Electronic Shift (ESM): Installation

WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
GC0170239Courtesy of CHRYSLER GROUP, LLC
  1. Connect the shifter wire harness connector (1).
    GC0170142Courtesy of CHRYSLER GROUP, LLC
  2. Position the shifter (2) in the vehicle, install the shifter bolts (1) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS .
    GC0170250Courtesy of CHRYSLER GROUP, LLC
  3. Install the shifter bezel panel (1).
    GC0170308Courtesy of CHRYSLER GROUP, LLC
  4. Install the shifter knob (2) and boot (1) on the shift lever.
  5. Securely install the shifter knob fastener (4).
  6. Connect the wire harness connector (3).
  7. Secure the shifter boot (1) to the shifter bezel panel.
About FixVault