FixVault
Home › Dodge and Ram › 2021 › ProMaster City Base › Repair and Diagnosis › External Pages › Different car › Section 2 (Electronic Control Modules (Service Information)) › Module, Radio Frequency (RF Hub) › Removal

Module, Radio Frequency (RF Hub): Removal

WARNING: This page is about a different car, the 2020 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the rear shelf trim panel. Refer to PANEL, REAR SHELF, REMOVAL .
    GC0170521Courtesy of CHRYSLER GROUP, LLC
  3. Remove the Remote Frequency Hub (RF-Hub) retainers (1).
  4. Disconnect the RF-Hub wire harness connectors.
  5. If equipped, disconnect the Remote Start Antenna (RSA) (3).
  6. Remove the RF-Hub from the vehicle.
About FixVault