FixVault
Home › Dodge and Ram › 2022 › ProMaster 1500 › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System › Fuel Injection, Gas › Sensor, Manifold Absolute Pressure (Map) › Removal

Sensor, Manifold Absolute Pressure (Map): Removal

  1. Disconnect and isolate the negative battery cable.
    GC0203827Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the MAP sensor wire harness connector (1).
  3. Rotate the MAP sensor (2) 1/4 turn counterclockwise and pull the sensor straight up and out of the upper intake manifold.
    GC0144249Courtesy of CHRYSLER GROUP, LLC
  4. The MAP sensor O-ring (1) can be reused if not damaged.
About FixVault