3.6L - DTCS P2128 To P2299

• Diagnosis And Testing
  • P2128-Accelerator Pedal Position Sensor 2 Circuit High
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2135-Throttle Position Sensor 1/2 Correlation
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2138-Accelerator Pedal Position Sensor 1/2 Correlation
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2166-Accelerator Pedal Position Sensor 1 Maximum Stop Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2167-Accelerator Pedal Position Sensor 2 Maximum Stop Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2172-High Airflow/Vacuum Leak Detected (Instantaneous Accumulation)
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2173-High Airflow/Vacuum Leak Detected (Slow Accumulation)
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2174-Low Airflow/Restriction Detected (Instantaneous Accumulation)
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2181-Cooling System Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P219A-Air-Fuel Ratio Cylinder Imbalance Bank 1
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P219B-Air-Fuel Ratio Cylinder Imbalance Bank 2
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2226-Barometric Pressure Sensor
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2228-Barometric Pressure Circuit Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2229-Barometric Pressure Circuit High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2271-O2 Sensor 1/2 Signal Stuck Rich
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2273-O2 Sensor 2/2 Signal Stuck Rich
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2299-Brake Pedal Position / Accelerator Pedal Position Incompatible
    • Notes
    • Theory Of Operation
    • Component Functional Description - Brake Switch
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test