Heater, Engine Block: Installation: 5.7L/6.2L/6.4L

Courtesy of CHRYSLER GROUP, LLC

1. Thoroughly clean the cylinder block core hole and the block heater seat.
2. Install the block heater assembly (2) into the engine block and tighten the bolt (3) to the proper torque specifications. Refer to 5.7L/6.4L TORQUE SPECIFICATIONS .
3. Connect the power cord to the block heater.
4. Install the starter. Refer to STARTER, INSTALLATION .
5. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
6. Remove the support and lower the vehicle.