FixVault

Module, Forward Facing Camera (FFCM): Installation

NOTE:

Make sure the windshield is clean of dirt, dust, or finger prints prior to installing the Forward Facing Camera Module (FFCM).

  1. Position the FFCM and FFCM bracket to pins on windshield.
  2. Press the rear of the FFCM forward until it is secured and snapped into the proper position.
    GC0177375Courtesy of CHRYSLER GROUP, LLC
  3. Connect the wire harness connector (1) to the back of the FFCM.
  4. Install the rear view mirror covers. Refer to MIRROR, REARVIEW, INSTALLATION .
  5. Perform the FFCM calibration procedure. Refer to MODULE, FORWARD FACING CAMERA (FFCM), MODULE PROGRAMMING .