FixVault
Home › Dodge and Ram › 2024 › Durango R/T Plus, AWD › Repair and Diagnosis › Engine Performance › Ignition System (Service Information) › Sensor, Camshaft Position › Removal › 6.2L

Sensor, Camshaft Position: Removal: 6.2L

  1. Disconnect and isolate the negative battery cable.
  2. Disconnect the Camshaft Position (CMP) sensor wire harness connector (1).
    GC0170371Courtesy of CHRYSLER GROUP, LLC
  3. Remove the CMP sensor retaining bolt (3).
  4. Remove the CMP sensor (2) from the timing cover.
About FixVault