Spring, Front Coil: Installation

Courtesy of CHRYSLER GROUP, LLC

CAUTION:

Do not use any type of pliers on the chrome machined surface of shock/strut rod to assist in the disassembly/assembly of shocks or struts. Use only tools designed to hold the shock/strut rod stationary when servicing shock or strut components.

Compress the spring.
NOTE:
The orientation of the upper shock mount (3) in relation to the lower portion of the shock assembly (1) must be maintained during assembly.

NOTE:
Make sure the jounce bumper (4) is installed in the upper shock mount (3) and the dust shield (6) is installed in the upper spring isolator (5).

Courtesy of CHRYSLER GROUP, LLC

Courtesy of CHRYSLER GROUP, LLC
Install the components as removed:
- Spring assembly (1)
- Upper shock mount (3)
- Jounce bumper (4)
- Upper spring isolator (5)
- Dust shield (6)
- Spring (7)
CAUTION:
To avoid leakage or damage to the shock assembly, do not use any type of "Grips or Pliers" to hold the shock shaft while tightening the top nut of the assembly.
Using (special tool #2027800020, Kit, Remover - Installer Shock / Strut) install the shock upper mounting nut (2) and tighten to proper torque specifications. Refer to TORQUE SPECIFICATIONS .
Decompress the spring.
Remove the shock assembly from the spring compressor tool.
Install the shock assembly. Refer to SHOCK ABSORBER, SUSPENSION, INSTALLATION .