3.6L - DTCS P054A To P0600

• DTC Troubleshooting
  • P054A Cold Start Exhaust Camshaft Position Timing Over-Advanced - Bank 1 Sensor 2
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P054C Cold Start Exhaust Camshaft Position Timing Over - Advanced - Bank 2 Sensor 2
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0562 Battery/System Voltage Low
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0563 Battery/System Voltage High
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0572 Brake Switch 1 Stuck On
    • Component Functional Description - Brake Switch
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0573 Brake Switch 1 Stuck Off
    • Component Functional Description - Brake Switch
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P057B Brake Pedal Position Sensor "A" Circuit Performance
    • Theory Of Operation-Braking Systems
    • Component Functional Description - 3 Wire Brake Pedal Position Sensor
    • Component Functional Description - Hydraulic Control Unit (HCU) Assembly
    • Component Functional Description - Anti-Lock Brake System Control Module (Abs)
    • Technical Data-Braking System Messages
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Check For An Active Or Intermittent Condition
    • Diagnostic Test - Non-EBOOSTER Brake System - Pcm
  • P057C Brake Pedal Position Sensor Circuit Low
    • Theory Of Operation-Braking Systems
    • Component Functional Description - 3 Wire Brake Pedal Position Sensor
    • Component Functional Description - Hydraulic Control Unit (HCU) Assembly
    • Component Functional Description - Anti-Lock Brake System Control Module (Abs)
    • Technical Data-Braking System Messages
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Check For An Active Or Intermittent Condition
    • Diagnostic Test - Non-EBOOSTER Brake System - Pcm
  • P057D Brake Pedal Position Sensor Circuit High
    • Theory Of Operation-Braking Systems
    • Component Functional Description - 3 Wire Brake Pedal Position Sensor
    • Component Functional Description - Hydraulic Control Unit (HCU) Assembly
    • Component Functional Description - Anti-Lock Brake System Control Module (Abs)
    • Technical Data-Braking System Messages
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Check For An Active Or Intermittent Condition
    • Diagnostic Test - Non-EBOOSTER Brake System - Pcm
  • P0585 Speed Control Switch 1/2 Correlation
    • Theory Of Operation
    • Component Functional Description-Multiplex (MUX) Switch
    • Diagnostic Overview - MUX Switches
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P0600 Serial Communication Link
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test