3.6L - DTCS P2135 To P2226

• DTC Troubleshooting
  • P2135 Throttle Position Sensor 1/2 Correlation
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2138 Accelerator Pedal Position Sensor 1/2 Correlation
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2166 Accelerator Pedal Position Sensor 1 Maximum Stop Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2167 Accelerator Pedal Position Sensor 2 Maximum Stop Performance
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2172 High Airflow/Vacuum Leak Detected (Instantaneous Accumulation)
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2173 High Airflow/Vacuum Leak Detected (Slow Accumulation)
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2174 Low Airflow/Restriction Detected (Instantaneous Accumulation)
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2181 Cooling System Performance
    • Notes
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P219A Air-Fuel Ratio Cylinder Imbalance Bank 1
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P219B Air-Fuel Ratio Cylinder Imbalance Bank 2
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P2226 Barometric Pressure Sensor
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test