Fuel Injected Engines
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1990 Mitsubishi Van, 1990 Mitsubishi Sigma, 1990 Mitsubishi Precis, 1990 Mitsubishi Pickup, and 1990 Mitsubishi Montero. However, it is still accessible from the selected car via links, so may be relevant.
- Locate ignition timing adjustment connector. See IGNITION TIMING ADJUSTMENT CONNECTOR LOCATION table in this article. Connect jumper wire between ignition timing adjustment connector and ground.
- Check ignition basic timing. If ignition basic timing is not within specification, loosen distributor (or crank angle sensor on engines with dual coil assembly) and rotate to adjust timing as necessary. For ignition basic timing specification, see IGNITION TIMING SPECIFICATIONS table.
- Disconnect jumper wire from ignition timing adjustment connector.