Dynamic Damper
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 1992 Plymouth Colt Vista, 1992 Plymouth Colt, 1992 Eagle Summit Wagon, 1992 Eagle Summit, and 1992 Dodge Stealth. However, it is still accessible from the selected car via links, so may be relevant.
Dynamic damper must be properly positioned on axle shaft. Position damper so proper distance exists between damper and end of boot with axle shaft in a straight position. See Fig 1 . Distance must be within proper specification. See DYNAMIC DAMPER INSTALLATION SPECIFICATIONS table.
DYNAMIC DAMPER INSTALLATION SPECIFICATIONS
| Application | (1) Damper-To-Boot End Distance | |||
|---|---|---|---|---|
| Colt, Colt 200, Summit | ||||
| 1.5L | 17.1-17.3" (434-439 mm) | |||
| 1.6L | 5.5-5.7" (140-145 mm) | |||
| Colt Vista | 5.7-6.0" (145-152 mm) | |||
|
||||