Dynamic Damper

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1992 Mitsubishi Mirage, 1992 Mitsubishi Galant, 1992 Mitsubishi Eclipse, 1992 Mitsubishi 3000GT, and 1991 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.

Dynamic damper must be properly positioned on axle shaft. Position damper so proper distance exists between damper and end of boot with axle shaft in a straight position. See Fig 1 . Distance must be within specification. See the DYNAMIC DAMPER INSTALLATION SPECIFICATIONS table.

DYNAMIC DAMPER INSTALLATION SPECIFICATIONS

Application

⁽¹⁾ Damper-To-Boot End Distance In. (mm)

Mirage

1.5L

17.1-17.3 (434-439)

1.6L

5.5-5.7 (140-145)

⁽¹⁾	Ensure axle shaft is in straight position.

Fig 1: Installing Dynamic Damper

Courtesy of CHRYSLER MOTORS.